TECHNET Archives

January 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Tom Moore <[log in to unmask]>
Reply To:
Date:
Wed, 14 Jan 1998 17:27:27 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (27 lines)
Technetters,
In an attempt to reduce solder bridging between P-T-H leads one of
our employees raised the temperature on the solder pot of our wave
solder
machine. While this did alleviate most of the bridging effecting the
boards,on one board type, a multi-layer board, we ended up with numerous
overheated joints. Unfortunately it effected 27 boards, which for our
small shop would be a large amount of rework.

Reviewing both A-610 and J-STD-001 we didn't see anything that called
this out as a defect to rework or even a process indicator. Is this
correct?
Thanks for your help.
Tom Moore

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################


ATOM RSS1 RSS2