TECHNET Archives

January 1998

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Fw: [DC] Question on Plated holes
From:
Stephen Corke <[log in to unmask]>
Reply To:
TechNet Mail Forum.
Date:
Thu, 8 Jan 1998 16:14:17 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (26 lines) 
Subject: Re: [DC] Question on Plated holes


>Ben, I have been where you are.  Take some Kapton tape and put it over the
>via area that comes in contact with the metal part.   Don't rely on solder
>mask to insulate between the two parts as solder mask can be scratched
>easily and flake off.  Then you will have a short.
>
>Stephen Corke
>Sr. PWB Designer
>Optical Imaging Systems
>313-207-1274
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################

ATOM RSS1 RSS2