Mime-Version: |
1.0 |
Sender: |
|
X-To: |
|
Date: |
Tue, 6 Jan 1998 17:19:21 -0600 |
Reply-To: |
|
Subject: |
|
From: |
|
In-Reply-To: |
<CF6402C346C6D011BD2500A0C9319AF53E34F2@EXCH_SRV1> |
Content-Type: |
text/plain; charset="us-ascii" |
Parts/Attachments: |
|
|
Wolfgang Erat said:
>One of my customers is experiencing contacting problems at ICT on Entek
>finished boards. How can I help my customer with this ? I have heard
>about "Twister" testpins, increasing contacting force, tightly
>controlling initial thickness of the coating itself etc.
>What is your experience, What works in real life ?
I recommend that you print solder paste on the test points so that it will
reflow and leave a tin-lead surface. You can use a "spearpoint" test pin
which has a higher normal force to break the organometallic coating, but it
seems to me that modifying your stencil is a fairly inexpensive and
effective way to deal with this.
By design, most test points are clear and will take paste & reflow on top,
or wave solder automatically if that's your process.
I consider my life to be real. Maybe not - i.e., you are all just actors in
the ongoing tragi-comedy drama. If this is fiction, thanks for all the
effort out there, and your question is moot.
regards,
Jerry Cupples
Interphase Corporation
Dallas, TX USA
http://www.iphase.com/
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|