===========================================================================
Date:    6-JAN-1998 08:33:12.79
Name:   Bruce C. Rietdorf D613 x5150 MS10-61
From:   MOST::MRGATE::"MRS::SN_L=HOSTNODE::SN_U=BCRIET"
To:     MOST::INTERNET
Subj:   Marking per MIL-STD-130
 ===========================================================================

From:   NAME: Rietdorf,Bruce  <SN_U=BCRIET@SN_L=HOSTNODE@MRS@MOST>
To:     NAME: INTERNET.THE <INTERNET@MOST@MRGATE@MOST>

DATE : January  6, 1998
TO   : THE INTERNET
FROM : Bruce C Rietdorf
SUBJECT : Marking per MIL-STD-130

SMTP%"[log in to unmask]"

Our processes require that a printed wiring board supplier mark the revision
level and their tracability marking on each board. This marking must be
durable enough to withstand internal assembly processes (chemical cleanings,
solder baths, etc).

Could someone please assist me on what type of notes are used on the
procurement drawing to achieve this on non-military products? I'm aware that
the Military require this marking to be per MIL-STD-130.

Thanks in advance,

Bruce Rietdorf
Drafting Services
Raytheon Systems Company
(219) 429-5150
[log in to unmask]






      Bruce C Rietdorf

##############################################################
IPC Designers Council Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DESIGNERCOUNCIL <your full name>
To unsubscribe:   SIGNOFF DESIGNERCOUNCIL
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################