Subject: | |
From: | |
Reply To: | TechNet E-Mail Forum. |
Date: | Fri, 23 Jan 1998 17:14:15 -0500 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
We use some carriers that Stone Mountain Tool made up for us. They
work very well. I believe the material is propietary though. If your
interested in contacting them but don't have their number, send me a
note off-line and I'll get you the details.
At 04:37 PM 1/23/98 -0500, [log in to unmask] wrote:
>I would like some help on finding a good material for making card carriers
>to go through the reflow oven. We will be assembling a card with PTH
>connectors on both sides and will use the paste in hole process. The
>carrier would hold the bottomside connectors and support the board but
>cannot absorb too much heat to affect reflow. I have heard of ECP Plus
>from EMC and Delmat for making wave solder card carriers. Are those
>materials good for reflow as well? Is there anything better, less
>expensive, easier to machine, etc. out there? I would like to get the
>material in approximately 1/4" thick sheets and then have them milled out
>in our machine shop. You can e-mail me directly at [log in to unmask]
>
>Thanks for your input,
>Andrea Shurtz
>Lexmark Electronics
>
>################################################################
>TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
>################################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe: SUBSCRIBE TechNet <your full name>
>To unsubscribe: SIGNOFF TechNet
>################################################################
>Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional
information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>################################################################
>
>
>
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|
|
|