Thank you for the advise Colin. We are using 2 sheets of 7628 on either
side and the pressure is 250 PSI -we did try up to 350
Heat rise is 12 F/min with new paco-pads and 16 when using 1 new with one
old paco -pad. measurements were done by placing the thermocouple between
the 2 sheets of pre-preg on the top and bottom panel
i will slow down the heat rise futher as suggested by all of you
thank you
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################