Joe, These might help you:
http://www.bergquistcompany.com/whatsnew/gappad.htmlhttp://www.bergquistcompany.com/thermal/silpads.htmlhttp://www.bergquistcompany.com/thermal/tclad.html
John Balchunas
> Date: Fri, 9 Jan 1998 15:27:13 -0800
> From: Joe Wackerman <[log in to unmask]>
> Subject: Burrs on FETs
>
> We have identified a problem where burrs on FET tabs cut through the
> insulator (dry grease on Kapton), and short to the heatsink. To avoid this
> possibility, we now include a quick sanding operation at part prep. Very
> labor intensive, inconsistent, wasted time..... Anyone have similar
> problems? What do you do? Any automated equipment to do this operation?
> Thanks in advance. Joe
>
> Joe Wackerman
> Sr. Mechanical Engineer
> Parker Hannifin
> Compumotor Division
> http://www.compumotor.com
> voice 707-584-2522
> FAX 707-584-8015
> e-mail [log in to unmask]
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################