Steve,
I missed the original posting on this. We are in the same boat here, and
would like to share experiences.
Please forward your email address if you are interested.
Thanks
Richard Hamilton
Clemar Mfg. / Rain Bird
[log in to unmask]
> -----Original Message-----
> From: Stammely, Tim [SMTP:[log in to unmask]]
> Sent: Monday, January 26, 1998 5:25 AM
> To: [log in to unmask]
> Subject: Re: [TN] Design for Manufacturing
>
> I found Ray Prasad's, "Surface Mount Technology--Principles and
> Practice," to be a very helpful and update reference book.
>
> Regards,
>
> Tim Stammely
> Manufacturing Engineer
> Manufacturing Services & Integration (MSI)
>
> >-----Original Message-----
> >From: [log in to unmask] [SMTP:[log in to unmask]]
> >Sent: Friday, January 23, 1998 4:42 PM
> >To: [log in to unmask]
> >Subject: [TN] Design for Manufacturing
> >
> > All,
> >
> > We are a small engineering and manufacturing company just
> getting into
> > surface mount assembly. We have been almost exclusively through
> hole
> >but
> > with the elimination of many through hole parts, we find it
> necessary to
> > move on. Additionally, most of our manufacturing contracts in
> the past
> > were older 'build to print' jobs based upon old designs for our
> military
> > customers.
> > Soon, both manufacturing and engineering representatives will
> meet to
> > discuss manufacturing's design requirements. Because we have
> had so
> >little
> > experience with surface mount assembly, we really don't know
> what to ask
> > for from a design for manufacturing standpoint.
> > I would be interested in any design specifications or really any
> reading
> > material that could point us in the right direction (i.e. pad
> geometry,
> > component orientation, etc.) as well as manufacturing
> > specifications/guidelines (i.e. stencil printing, solder reflow,
> etc.).
> >We
> > are currently reviewing IPC-S-816, D-279, and SM-782.
> >
> > Thank you all in advance of your support.
> >
> > Steve McBride
> > Manufacturing Engineer
> > Frontier Electronic Systems Corp.
> >
> > (www.FEI-CORP.com)
> >
> >################################################################
> >TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> >################################################################
> >To subscribe/unsubscribe, send a message to [log in to unmask] with
> following
> >text in the body:
> >To subscribe: SUBSCRIBE TechNet <your full name>
> >To unsubscribe: SIGNOFF TechNet
> >################################################################
> >Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional
> >information.
> >For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> >847-509-9700 ext.311
> >################################################################
>
> ################################################################
> TechNet E-Mail Forum provided as a free service by IPC using LISTSERV
> 1.8c
> ################################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe: SUBSCRIBE TechNet <your full name>
> To unsubscribe: SIGNOFF TechNet
> ################################################################
> Please visit IPC web site (http://jefry.ipc.org/forum.htm) for
> additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> 847-509-9700 ext.311
> ################################################################
################################################################
TechNet E-Mail Forum provided as a free service by IPC using LISTSERV 1.8c
################################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TechNet <your full name>
To unsubscribe: SIGNOFF TechNet
################################################################
Please visit IPC web site (http://jefry.ipc.org/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
################################################################
|