TECHNET Archives

January 1998

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Ed Cosper <[log in to unmask]>
Date:
Thu, 15 Jan 1998 13:03:38 -0700
Reply-To:
"TechNet Mail Forum." <[log in to unmask]>, "Joe Felts Jr." <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset="us-ascii"
From:
"Joe Felts Jr." <[log in to unmask]>
Parts/Attachments:
text/plain (55 lines)
Do you really need a separate machine?  You may find that your existing
punch has plenty of hydraulic capacity to poke through .059".  You would,
however, need a separate set of punch blocks with a larger clearance
between punch and die (still an order of magnitude cheaper than a whole new
machine).  To avoid hydraulic 'spikes' on thicker materials, Multiline
[used to ] recommend a "firing order" for the punches, where each punch
would be a slightly different length (a few mils) so they don't impact the
material at exactly the same time.  Anyway, if an available machine doesn't
turn up here, you might check one of the 3 or 4 used equip. dealers found
in the back of our industry mags.

Joe Felts


-----Original Message-----
From:   Ed Cosper [SMTP:[log in to unmask]]
Sent:   Thursday, January 15, 1998 9:03 AM
To:     [log in to unmask]
Subject:        [TN] Punch needed

I am in the market for a used Multiline innerlayer punch capable of
punching the standard multiline 4 slot system in thick cores up to .059. I
already have the Multline punch for thin cores. I should point out that I
am not interested in the post etch punch. We still punch our cores after
coating. Can anyone help.

Ed Cosper
Graphic Electronics Inc.
Tulsa, OK

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################

ATOM RSS1 RSS2