Sender: |
|
Date: |
Tue, 6 Jan 1998 10:47:19 -0800 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset=us-ascii |
Organization: |
Techsonic Industries, Inc. |
From: |
|
Parts/Attachments: |
|
|
Does UL or any other agency require the PCB vendor marking be in copper and not silkscreen?
--
Scott Buscomb, Senior Designer
[log in to unmask]
Techsonic Industries
1111 Alderman Dr. Ste. 250
Alpharetta, GA 30005
770 475-3020 ext.1032
Taylor, Chris H. wrote:
> For a commercial application, Bruce I typically use the following:
> MARK OR STAMP REVISION LEVEL AND VENDOR TRACABILITY IDENT IN LOCATION
> SHOWN USING WHITE EPOXY BASE MARKING INK WITH .12 +/- .02 HIGH SINGLE
> STROKE GOTHIC CHARACTERS. MARKING SHALL NOT EXTEND ON TO ANY EXPOSED
> SOLDER LANDS OR CONDUCTORS.
> Chris Taylor
> Senior Printed Circuit Designer
> LXE, Inc.
> 125 Technology Parkway
> Norcross, GA 30092
> voice: (770) 447-4224 X3242
> fax: (770) 447-6928
> e-mail: [log in to unmask]
>
> >----------
> >From: Bruce C. Rietdorf D613 x5150 MS10-61[SMTP:[log in to unmask]]
> >Sent: Tuesday, January 06, 1998 8:35 AM
> >To: [log in to unmask]
> >Subject: [DC] Marking per MIL-STD-130
> >
> >============================================================================
> >Date: 6-JAN-1998 08:33:12.79
> >Name: Bruce C. Rietdorf D613 x5150 MS10-61
> >From: MOST::MRGATE::"MRS::SN_L=HOSTNODE::SN_U=BCRIET"
> >To: MOST::INTERNET
> >Subj: Marking per MIL-STD-130
> >============================================================================
> >
> >From: NAME: Rietdorf,Bruce <SN_U=BCRIET@SN_L=HOSTNODE@MRS@MOST>
> >To: NAME: INTERNET.THE <INTERNET@MOST@MRGATE@MOST>
> >
> >DATE : January 6, 1998
> >TO : THE INTERNET
> >FROM : Bruce C Rietdorf
> >SUBJECT : Marking per MIL-STD-130
> >
> >SMTP%"[log in to unmask]"
> >
> >Our processes require that a printed wiring board supplier mark the revision
> >level and their tracability marking on each board. This marking must be
> >durable enough to withstand internal assembly processes (chemical cleanings,
> >solder baths, etc).
> >
> >Could someone please assist me on what type of notes are used on the
> >procurement drawing to achieve this on non-military products? I'm aware that
> >the Military require this marking to be per MIL-STD-130.
> >
> >Thanks in advance,
> >
> >Bruce Rietdorf
> >Drafting Services
> >Raytheon Systems Company
> >(219) 429-5150
> >[log in to unmask]
> >
> >
> >
> >
> >
> >
> > Bruce C Rietdorf
> >
> >##############################################################
> >IPC Designers Council Mail List provided as a free service by IPC using
> >LISTSERV 1.8c
> >##############################################################
> >To subscribe/unsubscribe, send a message to [log in to unmask] with following
> >text in the body:
> >To subscribe: SUBSCRIBE DESIGNERCOUNCIL <your full name>
> >To unsubscribe: SIGNOFF DESIGNERCOUNCIL
> >##############################################################
> >Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
> >information.
> >For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> >847-509-9700 ext.311
> >##############################################################
> >
>
> ##############################################################
> IPC Designers Council Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe: SUBSCRIBE DESIGNERCOUNCIL <your full name>
> To unsubscribe: SIGNOFF DESIGNERCOUNCIL
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
IPC Designers Council Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DESIGNERCOUNCIL <your full name>
To unsubscribe: SIGNOFF DESIGNERCOUNCIL
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|