DESIGNERCOUNCIL Archives

January 1998

DesignerCouncil@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
DesignerCouncil <[log in to unmask]>
X-To:
[log in to unmask]
Date:
Thu, 8 Jan 1998 15:50:43 -0500
Reply-To:
"DesignerCouncil Mail Forum." <[log in to unmask]>, Stephen Corke <[log in to unmask]>
Subject:
Re: Question on Plated holes
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset="iso-8859-1"
From:
Stephen Corke <[log in to unmask]>
Parts/Attachments:
text/plain (21 lines) 
Ben, I have been where you are.  Take some Kapton tape and put it over the
via area that comes in contact with the metal part.   Don't rely on solder
mask to insulate between the two parts as solder mask can be scratched
easily and flake off.  Then you will have a short.

Stephen Corke
Sr. PWB Designer
Optical Imaging Systems
313-207-1274

##############################################################
IPC Designers Council Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE DESIGNERCOUNCIL <your full name>
To unsubscribe:   SIGNOFF DESIGNERCOUNCIL
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################

ATOM RSS1 RSS2