TECHNET Archives

December 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Ken Patel <[log in to unmask]>
Reply To:
TechNet Mail Forum.
Date:
Thu, 4 Dec 1997 09:34:27 -0800
Content-Type:
text/plain
Parts/Attachments:
text/plain (73 lines)
Contact Iraj Barabi at Oz Technologies for non reflow type BGA socket. Here
is the phone and fax number...

Ph (510) 782-2654
Fx (510) 782-2656

Hope this will help.

re,
ken patel

At 11:21 AM 12/2/97 -0500, Charles Elliott wrote:
>Subject: BGA Sockets                                      1997.12.0211:10 AM
>
>Hi TechNetters,
>
>I am searching for BGA sockets which do not involve reflowing the BGA to an
>interposer type carrier. Here is the desired solution:
>
>1) BGA component lands on board (1.27 mm pitch)
>2) Mount BGA socket to board via reflow (using local reflow)
>3) Snap or clip BGA into BGA socket (coplanarity may be an issue)
>
>Does such a BGA socket exist ?  The objective is not to reflow the BGA.
>
>The only solution which I have found involves reflowing the BGA to an
>"interposer".  This interposer has a male pin grid array on the bottom. A
>female pin grid array adapter is mounted to the BGA component lands on the
>board by reflow.  This results in a PGA type socket where BGAs can easily be
>removed from the board.  I have identified two suppliers for this type of
>solution.  Please contact me off-line if this interests anyone.
>
>If anyone knows of a BGA socket which does not involve reflowing the BGA, I
>would be most interested in hearing about it.
>
>Thanks in advance.
>Charles Elliott
>NPI Process Engineering
>Newbridge Networks
>[log in to unmask]
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
text in the body:
>To subscribe:   SUBSCRIBE TECHNET <your full name>
>To unsubscribe:   SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>##############################################################
>
>
______________________________________________________
Ken Patel                       Phone:  (408) 490-6804
575 Cottonwood Dr.              Fax:    (408) 490-6859
Milpitas, CA 95035              Beeper: (888) 769-1808

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################


ATOM RSS1 RSS2