Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Thu, 18 Dec 1997 17:47:00 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Ray,
No violation, but the function isn't necessarily the same. Foil being
soft,
it won't disperse pressure over area as will the washer....so be
careful.
Unless you have a large screw head, you can still pull it through the
board if foil is your washer and you don't control installation torque.
My suggestion is continue using a flat washer (if you need the
strength),
forget plating the hole, control torque as needed and use loctite.
This will provide good service even in harsh conditions.
(Just a hint on torque, 4-40 screw 20-25 in/oz)
Jeff Case
[log in to unmask]
----------
From: VOLPE, RAY
To: [log in to unmask]
Subject: [TN] IPC-A-610 Conformance ?
|
|
|