TECHNET Archives

December 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Fred Johnson <[log in to unmask]>
Reply To:
TechNet Mail Forum.
Date:
Wed, 17 Dec 1997 20:20:05 +0000
Content-Type:
text/plain
Parts/Attachments:
text/plain (46 lines)
OK, Steve.
One thing that I have seen with double treat is that the zinc treatment on
the dendrites apparently is thicker than with single treat foil, and when
processing through the e'less copper process the inner layer copper is
etched back and the zinc "tails" remain.  These can give the appearance
of a defect.  This is only seen with non-catalyzed peroxy-sulfuric or with
persulfate etches (I haven't seen too many other types of microetches
used); catalyzed peroxy-sulfurics seem to etch away the zinc tails pretty
well.
I would assume that you know most of the potential reasons for having
ICDs (if you want to discuss it, let me know and we'll run through the list).

Fred J.

>>> Steves <[log in to unmask]> 12/17/97 06:43am >>>
Fred J.:

     I am talking about electroless copper and seperation between the
electroless and the innerlayer copper.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
##############################################################

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################


ATOM RSS1 RSS2