Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Mon, 1 Dec 1997 12:17:13 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Robert and Jim,
Being new to this 'SMT' stuff, I would also be interested in following
this thread, here on the forum if appropriate and feasible.
Thanks.
Richard Hamilton
Clemar Mfg. / Rain Bird
> -----Original Message-----
> From: Furrow, Robert Gordon (Robert) [SMTP:[log in to unmask]]
> Sent: Monday, December 01, 1997 10:25 AM
> To: [log in to unmask]
> Subject: Re: [TN] Via in Pad for BGA
>
> Jim,
> I would be very interested in learning more about this process. Do you
> have several board suppliers that provide this for you? How much of a
> cost adder is it? What is the smallest hole that can be filled and
> plated over? Could you give me a more detailed explanation of the
> polyimide bonding? What type of product has this process been used
> for
> (is it BellCore applicable)? Any further info you could give me would
> be
> greatly appreciated as we would like to fill and plate vias on some of
> our product. My email is [log in to unmask] and my phone is
> 978-960-3224.
> Thanks in advance,
> Robert Furrow
>
> >----------
> >From: Jim Marsico 516-595-5879[SMTP:[log in to unmask]]
> >Sent: Monday, December 01, 1997 10:21 AM
> >To: [log in to unmask]
> >Subject: Re: [TN] Via in Pad for BGA
> >
> >We do use via-in-pad technology for our BGA components. Our boards
> are
> >designed, however, with a thin layer of polyimide which is bonded to
> the back
> >side of the multilayer board. During the bonding process, the vias
> get
> >filled
> >with resin. We then require our suppliers to copper plate over the
> resin
> >filled vias then solder coat. The result is a solid surface mount
> pad with a
> >via inside which is undetectable.
> >
> >Jim Marsico
> >(516) 595-5879
> >[log in to unmask]
> ################################################
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|