TECHNET Archives

November 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Reply To:
TechNet Mail Forum.
Date:
Wed, 5 Nov 1997 08:24:09 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines)
You may want to look at the bare boards coming in.
It is probably a case whereby the fabricator has too
much solder at the "buttline" through his process and
it will be extremely difficult for you to prevent the solder
from encroaching the fingers without  taping.  Taping does
not always work either.  My suggestion is to go to
an organic coating.
As another clue, your assembly vendor is having a
very tough time getting boards into their process
without solder on the fingers already.  I will get in
touch with you off line to discuss this.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################


ATOM RSS1 RSS2