TECHNET Archives

November 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Larry J. Fisher" <[log in to unmask]>
Reply To:
TechNet Mail Forum.
Date:
Mon, 24 Nov 1997 11:08:49 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (32 lines)
Normally, you do test the entire panel when doing ionic cleanliness testing.
You calculate the surface square feet of the panel (in case of an 18" X 24"
panel, that would be 6.00 square feet) and then add the volume of solution
(usually a 75%/25% blend of isopropyl alcohol/DI water) to just cover the
panel in the tank. Depending on the particular machine, you either input the
specifics of the test (square footage of panel, volume of solution, etc) into
the processor or you do it by hand calculator.

You can cut up the panels to do the test; however, I would recommend that you
get an instrument that will accommodate your largest panels (don't think
there is too much difference in cost). In this manner, you have a totally non
destructive test and the test results will be totally representative of the
panel, not just a portion of it.

Hope this helps

Larrry Fisher
Dexter Electronic Materials
[log in to unmask]

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################


ATOM RSS1 RSS2