Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Thu, 20 Nov 1997 10:40:18 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
According to IPC-A-610, Rev. B, if you are complying with class 2, then you
cannot mount a lock washer directly on the laminate; you must use a flat
washer, then the lock washer. However, 610B only illustrates this for
split-ring lock washers. Does this same rule apply to external- or
internal-tooth lock washers as well?
J. LaFontaine
Digi International
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|