TECHNET Archives

November 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Hans Rohr <[log in to unmask]>
Reply To:
Date:
Wed, 12 Nov 1997 20:57:53 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (19 lines)
Does anyone know of a method form measure solder thickness at the knee
of a hole after HASL other than by cross-sectioning?  We do horizontal
HASL and when the air knives are set for producing very flat surface
mount pads we sometimes get thin solder at the hole knee.  We would like
to do a quick non-destructive test so when can chart thickness on a
regular basis.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################


ATOM RSS1 RSS2