You may want to look at the bare boards coming in.
It is probably a case whereby the fabricator has too
much solder at the "buttline" through his process and
it will be extremely difficult for you to prevent the solder
from encroaching the fingers without taping. Taping does
not always work either. My suggestion is to go to
an organic coating.
As another clue, your assembly vendor is having a
very tough time getting boards into their process
without solder on the fingers already. I will get in
touch with you off line to discuss this.
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################