Mime-Version: |
1.0 |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Thu, 20 Nov 1997 10:40:18 -0600 |
Content-Type: |
text/plain; charset="US-ASCII" |
Organization: |
Digi International |
Reply-To: |
|
Parts/Attachments: |
|
|
According to IPC-A-610, Rev. B, if you are complying with class 2, then you
cannot mount a lock washer directly on the laminate; you must use a flat
washer, then the lock washer. However, 610B only illustrates this for
split-ring lock washers. Does this same rule apply to external- or
internal-tooth lock washers as well?
J. LaFontaine
Digi International
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|