TECHNET Archives

November 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Sender:
X-To:
Date:
Tue, 11 Nov 1997 23:18:06 -0500
Reply-To:
"TechNet Mail Forum." <[log in to unmask]>, Erika Pacheco <[log in to unmask]>
Subject:
MIME-Version:
1.0
Content-Transfer-Encoding:
7bit
Content-Type:
text/plain; charset=us-ascii
From:
Erika Pacheco <[log in to unmask]>
Parts/Attachments:
text/plain (44 lines)
[log in to unmask] wrote:
>
> Among the ways of sealing vias on LPI solder masked boards are a)  filling
> the vias with LPI, and b) tenting the vias with dry film solder mask.
>
> We are on the brink of converting from dry film to LPI on all our PCB's.  I
> would appreciate any comments on the relative merits/demerits of boards
> produced by these two processes.  Our supplier recommends the dry film
> option.
>
> Our boards are sometimes in relatively harsh environments and are designed
> to operate from -40 C to +70 C.
>
> Thanks to those of you who responded to my inquiry on how to repair
> urethane conformally coated boards which have been contaminated with
> silicone prior to conformal coating.
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
> ##############################################################
     Have you looked into Taiyo LPI. We use a Taiyo LPI and plug the
vias with a Lackwerke Peters hole plug. Great processing latitude on the
Taiyo and we haven't had any issues with the hole plug...been doing it
for quite a while now.

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################


ATOM RSS1 RSS2