Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Thu, 30 Oct 1997 22:08:26 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi Art,
I guess you need to find out the actual causes of the dross build-up. What
type of wave nozzle your machine is using. Is the wave too turbulent ?
Check the way that you maintain the wave-solder pot, it is one of the
important area to look at..
Poh
====================================================================
At 12:13 PM 10/29/97 +0000, Art G. Pauly wrote:
>I have been having problems with excessive dross build-up in our wave
>solder machine.
>We are considering adding marbles to the solder pot. I_ve heard
>conflicting advice on whether or not this is a good idea. I have heard
>that it may keep the dross down, but it may also increase the
>contamination levels. Does a dross layer over the marbles protect the
>solder from contamination? DOES ANYONE HAVE ANY ADVICE ABOUT DROSS &
>MARBLES?
>
>
> -Art Pauly
>*******************************************
> Art Pauly ([log in to unmask])
> Manufacturing Process Engineer
> Kistler Instrument Corporation, USA
> Phone: (716)691-5100 Fax: (716)691-5226
> World Wide Web http://www.kistler.com
>*******************************************
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with
following text in the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
additional information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
847-509-9700 ext.311
>##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|