If you are talking about the voids at the PTH walls, one way is to dip
the PCB in a solder pot for a few seconds and then do cross-section
throught the solder in the PTH. Outgassing will occur if there is a
void, hence bubble is visible in the PTH solder. I tried this method
before, and find it very difficult to discover the bubbles because of
their small size. Anybody have a better method please let me know.
______________________________ Reply Separator _________________________________
Subject: [TECHNET] Viod Inspect
Author: "TechNet Mail Forum." <[log in to unmask]>, at corp