Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Thu, 23 Oct 1997 13:37:37 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Lainie,
How old are your boards? Is your plant air conditioned? Boards from
good suppliers should not need to be heated, even after a year in an air
conditioned plant. You did not say if your in-line cleaner was aqueous
or solvent based. Either way, if these are new FR-4 boards I would not
expect that you would have to bake them.
Bev Christian
Nortel
[log in to unmask]
>----------
>From: Lainie Loveless[SMTP:[log in to unmask]]
>Sent: Thursday, October 23, 1997 12:10 PM
>To: [log in to unmask]
>Subject: [TN] Assy: Baking prior to Wave & Reflow
>
>Does anyone have any info quantifying board baking prior to reflow
>and wave soldering? Temps/ lengths of time @...? Also, does anyone
>have the scenario where a board is misprinted (solder paste), is sent
>thru a cleaner (in-line) and is then re-printed for placement. Do
>you re-bake and at what time/temp's?
>
>Thanks in advance!
>Lainie Loveless
>General Atronics Corp
>Wyndmoor, PA
>(215) 242-7336
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
>847-509-9700 ext.311
>##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|