I will also appreciate info on that.
[log in to unmask]
> ----------
> From:         Lang, Michael[SMTP:[log in to unmask]]
> Sent:         October 16, 1997 4:10 AM
> To:   [log in to unmask]
> Subject:      [TECHNET] Solder Stencil Guidelines Wanted...
>
> Does anyone have a set of Solder Paste Stencil Design Guidelines they
> could
> share with me?  I wish to build a standard set of guidelines to
> simplify our
> stencil design.  Ideally it would address stepped stencils, coarse and
> fine
> pitch on the same PCB, etc, but anything would be acceptable.
>
> Thanks,
>
> Mike Lang
>
> ##############################################################
> TechNet Mail List provided as a free service by IPC using LISTSERV
> 1.8c
> ##############################################################
> To subscribe/unsubscribe, send a message to [log in to unmask] with
> following text in the body:
> To subscribe:   SUBSCRIBE TECHNET <your full name>
> To unsubscribe:   SIGNOFF TECHNET
> ##############################################################
> Please visit IPC web site (http://www.ipc.org/html/forum.htm) for
> additional information.
> For the technical support contact Dmitriy Sklyar at [log in to unmask] or
> 847-509-9700 ext.311
> ##############################################################
>

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################