Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Fri, 17 Oct 1997 19:01:04 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I would appreciate any help in finding vendors for the equipment used in
attaching solder paste stencils to screen printer frames.
To be more specific, a solder paste stencil itself is typically 6 to 8 mil
stainless steel or nickel foil with the pattern openings formed by etching,
laser machining or electroforming. This foil might then be adhesive bonded
directly to a screen frame or to a fabric web which, in turn, is adhesive
bonded to a screen frame. My interest is the vendors who build the
equipment to accomplish these adhesive bonding processes.
I have also seen proprietary techniques utilizing a pattern etched into the
edge of the stencil foil designed to be engaged by a complementary finger
arrangement in the screen frame. I would also appreciate any leads on
these processes.
Please send a copy of replies to [log in to unmask]
Thanks for your help
Jerry
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|