Hi Christina -- The paper entitled 'Effect Of Au On The Reliability Of
Fine Pitch Surface Mount Solder Joints" from the 1991 SMI Proceedings may
provide some helpful information. I can Fax a copy if you'd like.
Dan Babcock
Sr. Engineer
Maxtor Corp
[log in to unmask]
>Subject: Brittle Solder Joints
>
>Hello,
>
>I am looking for some information either from experience or papers on
>what causes brittle solder joints. We have immersion gold over nickel
>and use eutectic solder paste. Board material is high-temp FR4. I
>would like to know:
>
>1. How many heat cycles a solder joint will tolerate without becoming
>brittle. Is there a temp that a solder joint becomes brittle and the
>crystalline structure changes (as in steel tempering)?
>2. What would be the definition of a heat cycle (would it be reaching
>183 C or something else)?
>3. What is a safe temp to have boards at during a stress testing..
>
>any information or a contact to find information would be greatly
>appreciated.
>Thanks in advance for your help,
>
>Christina Piasky ([log in to unmask])
>Sequent Computer Systems
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################