Subject: | |
From: | |
Reply To: | DesignerCouncil Mail Forum. |
Date: | Wed, 1 Oct 1997 15:45:53 -0700 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Scott,
We at Praegitzer Design have the ability to output
IPC-D-356 netlist from most of our systems, We currently are using
Mentor, Allegro, Veribest, Visula, Accel tools (Tango/PCAD), PADS Power
PCB. The cam tool we use is really a manufacturing tool Valor Enterprise
3000, which we use at all of our Design centers along with our
Manufacturing sites (Praegitzer Industries Inc.).
Dave
-----Original Message-----
From: DesignerCouncil [SMTP:[log in to unmask]] On Behalf
Of Buscomb, Scott
Sent: Wednesday, October 01, 1997 2:11 PM
To: [log in to unmask]
Subject: [DESIGNERCOUNCIL] IPC-D-356 and ATE files
I have a few questions regarding files for bare PCB ATE:
1. Does anyone have the ability to output an IPC-D-356 file from
their
PCB design software?
If so what system are you using?
2. Is anyone supplying ATE netlist files to their PCB fab shops?
What
format is the file? What CAM software is the shop using?
If you have any input or opinions on this subject please jump
in.
Thanks in advance,
Scott
__________________________________
Scott Buscomb, Senior CAD Designer
[log in to unmask]
voice 770 338-6170
MTCC/Panasonic, Pager Development
1225 Northbrook Pkwy, Ste 2-358
Suwanee, GA USA 30024
__________________________________
##############################################################
IPC Designers Council Mail List provided as a free service by
IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask]
with following text in the body:
To subscribe: SUBSCRIBE DESIGNERCOUNCIL <your full name>
To unsubscribe: SIGNOFF DESIGNERCOUNCIL
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm)
for additional information.
For the technical support contact Dmitriy Sklyar at
[log in to unmask] or 847-509-9700 ext.311
##############################################################
##############################################################
IPC Designers Council Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE DESIGNERCOUNCIL <your full name>
To unsubscribe: SIGNOFF DESIGNERCOUNCIL
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|