Subject: | |
From: | |
Reply To: | TechNet Mail Forum. |
Date: | Wed, 22 Oct 1997 10:19:22 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I believe you are discussing bare PWB's. What about lifted lands during
component soldering caused by thermal stress? I have gone through the
TechNet archives and I still don't have a clear definition of
acceptability/rejectability. Can you please help?
>----------
>From: Lisa Williams[SMTP:[log in to unmask]]
>Reply To: "TechNet Mail Forum." <[log in to unmask]>,Lisa Williams
>Sent: Wednesday, October 22, 1997 8:45 AM
>To: [log in to unmask]
>Subject: Re: [TECHNET] Lifted Lands per IPC-6012
>
>You got it exactly right.
>
>Lifted lands are NOT allowed when you are inspecting the board visually. If
>you can see the lift during a visual examination (usually done before thermal
>stress), then there is a problem and cause for reject.
>
>The thermal stress test method requires inspection by microsection. If you
>can't see lifted lands during the visual inspection, but you see it in the
>microsection...it is still okay.
>
>In fact a major OEM has postulated that if the lands lift during thermal
>stress the reliability of the PTH actually increases, because the FR4 can
>expand and contract independently of the copper (in other words the copper
>will not undergo as much mechanical stress).
>
>Lisa Williams
>IPC
>
>>>> APeder01 <[log in to unmask]> 10/21/97 03:15PM >>>
> I'm a bit confused (not unusual) by two paragraphs in IPC-6012
> regarding lifted lands.
>
> 3.3.4 Lifted Lands. The finised board SHALL not exhibit any lifted
> lands.
>
> 3.6.2.9 Lifted Lands. Lifted lands are allowed after thermal stress
> provided that the visual criteria of section 3.3.4 are met.
>
> So, is this telling me that lifted lands are okay as long as I can't
> see them? (If I can't see them, how would I know they were lifted?)
> Therefore, if there is visual evidence of a lift is it rejectable?
> Was the intent to allow or dis-allow lifted lands after thermal
> stress?
>
> Thank you for any clarification.
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
>847-509-9700 ext.311
>##############################################################
>
>##############################################################
>TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
>##############################################################
>To subscribe/unsubscribe, send a message to [log in to unmask] with following
>text in the body:
>To subscribe: SUBSCRIBE TECHNET <your full name>
>To unsubscribe: SIGNOFF TECHNET
>##############################################################
>Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional
>information.
>For the technical support contact Dmitriy Sklyar at [log in to unmask] or
>847-509-9700 ext.311
>##############################################################
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|