Sender: |
|
X-To: |
|
Date: |
Thu, 23 Oct 1997 10:02:53 +0100 |
Reply-To: |
|
Subject: |
|
From: |
|
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset=us-ascii |
Organization: |
Dyconex, Zuerich |
MIME-Version: |
1.0 |
Parts/Attachments: |
|
|
Aspect ratios smaller than 1:5 are never a problem in Fr-4 boards. For
thicker boards you can increase the copper thickness in the hole.
Remark: Because of the higher expansion rate of the acrylic adhesive
there are other rules for rigid flex boards.
You can find some more information on our webpage (technologies).
http://www.dyconex.com
Regards
F.Steiner, Dyconex
VOLPE, RAY wrote:
>
> Would there be any problem with using an .028 via hole in a .09thk , FR4
> material double sided PCB ?
> Reliability issues ? Thermal Stress?
>
> Thanks in advance, Ray
>
>
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
|
|