Dear Technetters
Following equipment list was prepared for 10,000 sq.m. single sided and
20,000 sq.m. double sided and multilayer capacity PCB Plant. We would like
to receive the price quote for each machinery you supply and any update you
suggest in the list of equipments. If you like me refer to equipment
manufacturers, we will appreciate that too. If Technet is not the right
place to draw attention to all equipment manufacturers, please redirect me
to the effective way.
I also apologizes to take the bandwidth of them, who has no interest in
this mail.
Thanks for your time and cooperation.
Looking forward to hear from you.
Sincerely
Syed Arif Mahmud
LIST OF PLANT & EQUIPMENT
==============================
A PLATING AREA
1. ACID COPPER PLATING LINES, (2) WITH LIP VENTS
COMPLETE WITH BARS SPARGE LINES, HEATER, CONTROLLERS,
FILTER SYSTEM, 2000 AMP RECTIFIER, OUTPUT
( 14 ) 18" X 24" PANELS PER HOUR EACH TANK.
2. TIN PLATE LINE COMPLETE WITH BARS, HEATERS,
CONTROLLERS FILTER SYSTEM 1500 AMP RECTIFIER,
OUTPUT (42) 18" X 24" PANELS PER HOUR WITEMS 1 & 2 LOT
3. PLATING RACKS, 140
4. SEMI-AUTOMATIC COMPUTER CONTROLLED ELECTROLESS
COPPER PLATING LINE WITH CAPACITY OF ( 40)
18" X 24" PANELS PER HOUR , DOUBLE SIDED AND
MULTILAYER, WESTERN TECHNOLOGY.
5. CONVEYORIZED TIN SOLDER STRIP LINE WCE CUSTOM
DESIGNED AND MADE.
6. HOT AIR LEVELER WITH PRE & POST CLEAN LINES,
FEEDER & STACKER CEMCO, TTM, VOSS.
7. ETCHER WITH CFR-R-RR-R-O, 4 ' - 6 ' PER MINUTE WITH
INSPECTION STATION & DRY FILM STRIP, WITH RINSE
& AIR KNIVES MARSECO, WESTERN TECHNOLOGY.
8. SCRUBBERS, OUTER LAYER 6 ' PER MINUTE, (2)
ASI, MARSECO, WESTERN TECHNOLOGY, CHEMCUT.
9. DRYER, (1) 6 ' PER MINUTE, CHEMCUT, MARSECO, COMAC.
10. OVEN, GRIEVE MODEL 333 OR EQUAL, 350 F (2) PURCHASE LOCAL.
11. AUTOMATIC GOLD/NI TIP PLATER,1.5 PER MINUTE TECHNIC, PAL.
12. 7 EACH TIMERS - GRAY LAB 0-60 MIN.
13. TAPE ROLLER, ELITE E-600
B PROGRAMMING : DESIGN
====================== ------
1. PROGRAMMER COMPUTER CONTROLLED, ADVANCED
CONTROLS CHECKMATEE II W/DISC & PUNCH/READER
EXCELLON, OPIC III, PCS.
2. LASER PLOTTER MCDONALD DETWILER, GERBER,
AOI, ORTROTECH OR EQUAL.
3. CAD SYSTEM
MCDONALD DETWILER, GERBER, AOI, ORTROTECH.
C. DRILLING
1. 2 EACH COMPUTER CONTROLLED, 4-HEADED DRILLING
MACHINES FOR 18" X 24" PANELS W/AUTOMATIC TOOL
CHANGERS EXCELLON MARK V & VI, TRUDRIL MODEL 97.
2. DRILL PINNER, BARNABY STACKMASTER, CARBET.
3. DRILL DEPINEER, CIRCUIT MACHINERY CO. , USM
4. DRILL SHARPENER, W/VIDEO CAMERA & MONITOR
INTERNATIONAL CARBIDE, TULON.
5. VACUUMS, (2) TORNADO 97771 DAYTON.
D. SCREEN PRINTING
===============
1. MANUAL SCREEN MACHINES, (5) ELITE E-1000 WITH PLEX TOP.
2. SEMI-AUTO SCREEN PRINTING MACHINE AUTO ROLL,
I-TRON, SEVECIA, ELITE OR EQUAL
3. FLIP TOP PRINTER, 30" X 40"
4. SCREEN FRAMES FOR SEMI-AUTO MACHINE, (10)
5. ADJUSTABLE AL. SCREEN FRAMES (15)
15 - 24" X 24"
15 - 30" X 30"
DIAMOND CHASE, BARNABY, PALOMAR
6. UV CURING MACHINE; COLIGHT UVC-24
C-SUN, SPE
7. WASH OUT BOOTH W/HIGH PRESSURE RINSE
8. SQUEEGEE SHARPENER
9. DEVELOPER 20" WITH DRYER FOR LPI
E. DRY FILM AREA
1. HOT ROLL LAMINATORS 24" (2) WITH CLEANER
DYNACHEM, WESTERN MAGNUM, DUPONT
2.EXPOSURE UNITS (2) , 1-3KW 24" X 30"
2-DRAWER & 1-5KW 24" X 30 2-DRAWER
COLIGHT, DUPONT OR EQUAL.
3. DEVELOPER 20" WITH DRYER CHEMCUT 547-20
ASI, MARSECO, WESTERN TECHNOLOGY OR EQUAL
F. FABRICATION SECTION
-----------------------------------
1. POWER SHEAR, NATIONAL PH-52 HYDRAULIC, 52"
PEXTO, DIACRO.
2. ROUTER, BARNABY MODEL 103, BENCH MODEL OR QUAL.
3. BEVELER, BARNABY MODEL 202 D J-DYECO.
4. SLOTTER SAW WITH BLADES, J-DYECO MODEL SL-01
W/DUST COLLECTOR BARNABY, SLOT MASTER.
5. NOTCHER, PEXTO, 6" DIACRO OR EQUAL.
6. ROUTER FOR 18" X 24" PANELS COMPUTER N/C
CONTROLLED, 4 SPINDLE ATI, TRUDRIL, PDA
-----------
PUNCH PRESS 60 TON PURCHASE LOCAL.
G. PHOTO SECTION
1. CONTACT PRINTER,
30" X 40" VACUUM FRAME W/100 WATT POINT
LIGHT NUARC, MILLINGTON OR EQUAL.
2 DIAZO DEVELOPER, QUANTUM 24D JAMES
RIVER GRAPHICS OR EQUAL.
3. MICRO MODIFIER, BYERS MODEL 5000 OR EQUAL
4. FILM PROCESSOR, DANAGRAPH DG-2600, DODAK, DUPONT.
5. FILM PUNCH, C.A. PICARD, MULTILINE OR EQUAL.
6. U.V. RADIOMETER
7. INFRARED DIGITAL THERMOTER (2)
------------
H. MULTILAYER LAMINATION
1. LAMINATING PRESS HOT 24" X 24" 4-OPENING
ELECTRIC 75 TONS 600 F& COOL PRESS 24"X 24"
(4-OPENING).
2. PREP ROOM ACCESSORIES, CAUL PLATES VACUM,
GEL TESTER, ARBEURPRESS WITH TOOL SLITTAR,
ROTO TRIM M-54T 52" (2) OVER ARM MICROMETER
PAPER CUTTER.
3. X-RAY MACHINE WITH POLAROID ATTACHMENT.
4. PIN-LAM MATERIAL PUNCH SYSTEM.
I. LAB AREA
----------------
1. METALLURGICAL MICROSCOPE W/CAMERA, UNITON,
B & L OR EQUAL.
2. MICRO SECTION POLISHER, BUEHLER, ECOMET OR EQUAL
3 GRINDER/POLISHER.
3. NON-DESTRUCTIVE METAL THICKNESS TESTER, TO
MEASURE GOLD, NICKEL, AND TIN UPA, FISCHER.
J. INSPECTION AREA
-----------------------------
1. MAGNIFYING CIRCULAR LAMPS (6), LEDU, DAYTON
PURCHASE LOCAL.
2. MICROSCOPES (5), W/10X EYE PIECES, POD
HOLDER AND BOOM STAND UNTIRON, B&L, OLYMPUS.
3. a) ELECTRICAL TESTER 25.000 TEST POINTS. b) ELECTRICAL
TEST PINS TRACE, MANIA, ATG. (200,000)
4. PULL TESTER, CECO TA 620-10E EQUAL
5. MICROWELDER WITH MICROSCOPE.
SUB-TOTAL =========
K. TOOLS & SPARES
L. SHIPPING
INSURANCE, CRATING, AND FREIGHT
M. INSTALLATION
SUPERVISION FOR INSTALLATION OF EQUIPMENT, TRAVEL,
ROOM AND LODGING.
Total : US $
TOTAL PRICE. US $
At 10:20 AM 8/9/97 +0530, H.N.Muralidhara wrote:
>Date: Fri, 8 Aug 1997 13:29:53 +0530 (IST)
>From: "H.N.Muralidhara" <[log in to unmask]>
>To: ALL INTERNET USERS <[log in to unmask]>
>Subject: 0.35 mm Drill Bits
>
>Dear Electonic data interchange user,
>
>We are one of the leading manufacturer and exporter in Printed Wiring
>boards ( P.C.B's ) with exceeding turnover of 70 crore rupees in our
>electronic business. Out of this, 60% of our product will export to world
>wide O.E.M's.
>
>The comany is also accredited with ISO 9002 in March 1993 and BS-7750 in
>March 1996 ( i.e. ISO 14000 )
>
>So, I request you to send your cometitive quotation with commercial terms
>for following drill bit.
>
>(1) Drill Bit dia : 0.35 mm
> Type : Standard
> Mimimum Flute Length : 5.5 mm
> Aprox. Qty. Req'd : 15,000 Nos
>
>Kindly confoirm the same by e-mail / FAX.
>
>Thanking you and best regards.
>
>
>H.N.MURALIDHARA
>M/s INDAL Electronis Limited,
>12/A, Industrial Area,
>Nanjangud - 571 301
>Mysore District,
>Karnataka State, INDIA
>
>PHONE No.: 91-8221-26584/26618/26619
>FAX : 91-8221-26641
>E-MAIL : [log in to unmask]
>WEB : http://www.indalpcb.com
>
****************************************************************************
*****
* *
* Syed Arif Mahmud *
* Executive President *
* OMNI High Tech Industries Ltd *
* INTELLECTS INC. *
* *
* Bangladesh Office: USA Office: *
* House No. 71/1 Austin, TX 78741 *
* Road No. 7/A (New) Email: [log in to unmask] *
* Dhanmondi R/A [log in to unmask] *
* Dhaka 1209, Bangladesh Home Phone: (880-2) 871014 *
* Phone: (880-2) 816543,9110364 Fax: (880-2)816546, 816648 *
* *
****************************************************************************
*****
##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe: SUBSCRIBE TECHNET <your full name>
To unsubscribe: SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################
|
