TECHNET Archives

September 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: PRESS FIT CONECTORS
From:
Johannes Sivula <[log in to unmask]>
Reply To:
TechNet Mail Forum.
Date:
Mon, 15 Sep 1997 12:03:56 +0300
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
Hi,

Which kind of connectors do you plan  to press-in ?
What is the finish on pcb ? HASL  is considered to be the best finishing
choice.
 If using other finishes there might be problems.
Framatome, Harting  and EPT  ( AMP )  are main manufacturers
of these kind of machines in Europa.
They also have good idea of details that the process, connectors  and
pcb`s  must fulfill in order to get good joint. ( see http://w3.ept.de/ )
Brs, Johannes

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################

ATOM RSS1 RSS2