I'm also interested to get any information on what is used for adhesion
testing!

Is it done in the assembly industry as a process control or incoming
control or anything else?

 
Regards


>X-Conversion-Id: <PU-NOTES.2185.873834377.28373>
>Date:         Tue, 9 Sep 1997 16:47:22 -0500
>Reply-To: "TechNet Mail Forum." <[log in to unmask]>,
>        Erik Olson <[log in to unmask]>
>Sender: TechNet Mail Forum<[log in to unmask]>
>From: Erik Olson <[log in to unmask]>
>Organization: Westell, Inc.
>Subject:      [TECHNET] Adhesive Test Equipment
>To: [log in to unmask]
>
>Hi TechNetters,
>
>I would appreciate any information or recommendations you could give me
regarding test equipment or gauge suppliers (manufacturer or distributor
name/phone/website info) for testing shear strength and pull-off
force/torque strength of cured SMT adhesive.
>
>Thanks,
>Erik Olson
>Westell, Inc.
>
>
-------------------------------------------------
Patrick Ducas
Process Quality Engineer 
Matrox Electronic Systems Ltd
E-mail: [log in to unmask]
Tél:(514)969-6000 ext.2971   Fax:(514)685-3415
-------------------------------------------------
        	

##############################################################
TechNet Mail List provided as a free service by IPC using LISTSERV 1.8c
##############################################################
To subscribe/unsubscribe, send a message to [log in to unmask] with following text in the body:
To subscribe:   SUBSCRIBE TECHNET <your full name>
To unsubscribe:   SIGNOFF TECHNET
##############################################################
Please visit IPC web site (http://www.ipc.org/html/forum.htm) for additional information.
For the technical support contact Dmitriy Sklyar at [log in to unmask] or 847-509-9700 ext.311
##############################################################