Dear Eshete:

Thanks for your valuable input.  
Would you please inform me of the viscosity anad/or any other important
technical data of the epoxy resin?

Thanks in advance.

Myung C. Chu


At 09:41 ¿ÀÀü 97-08-01 -0700, you wrote:
>Glenn:
>I am using 100% epoxy material to fill vias 100%.  This material is not
>conductive but does a good job.  You can use screen printing method
>(pushing through the via holes).
>
>For conductive material, you can use either silver, copper or a
>combination in paste form using the same method. I did not use this
>method but the manufacturer claims: either paste can fill vias 100%.
>If you want the manufacturer and/or a contact person, write me an
>e-mail.
>Hope this helps.
>
>Dejen Eshete
>Santa Clara
>
>
Myung C. Chu

CSS Asia Co., Ltd. 
Tel: 82-2-523-8810
Fax: 82-2-523-1483
E-Mail: [log in to unmask]