TECHNET Archives

August 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: wave profile needed
From:
Aric J Parr <[log in to unmask]>
Reply To:
TechNet Mail Forum.
Date:
Tue, 5 Aug 1997 15:03:49 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (10 lines) 
If these are caps, ferrite beads, some film resistors...your component supplier
has a preheat specification that must be met or the part will fail in the field.
On many machines, especially those with less than 5 feet of preheat or solder
temperature greater than 475 F, this will result in a very tight wave profile.

______________________________ Reply Separator _________________________________
Subject: [TECHNET] wave profile needed
Author:  "MIKE J. LOPEZ" <[log in to unmask]> at INTERNET

ATOM RSS1 RSS2