Subject: | |
From: | |
Date: | Thu, 31 Jul 1997 10:04:05 -0500 (CDT) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
IPC-SD-320 was canceled March 1992. It was superseded by IPC-RB-276,
which was then superseded (in October 1996) by IPC-6012, the rigid board
qualification specification.
I'm assuming IPC-A-6000 refers to the "0" revision of the standard; in
other words, the original publication. If so, this was canceled in Sept.
1979, and has been superseded several times. The current edition is
IPC-A-600E, published in AUgust 1995. This is a pictorial representation
of the requirements set forth in IPC-RB-276/IPC-6012.
Mike Buetow
IPC
2215 Sanders Road
Northbrook, IL 60062
P: 847-509-9700, ext. 335
F: 847-509-9798
[log in to unmask]
On Thu, 31 Jul 1997 [log in to unmask] wrote:
> From: Stephen Ayotte
> EM Quality Engineering
> Bldg. 14-3 Col F5 5-1537
> Subject: Fabrication Specs
>
> Any information on the following specs would be appreciated:
>
> IPC-SD-320
> IPC-A-6000
>
> they are not in my IPC manuals and do not know what they are
> about.
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|