Subject: | |
From: | |
Date: | Mon, 07 Jul 1997 09:57:05 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
JoAnn Amerson wrote:
>
> > I had run across a check list on line for PCB design at one time a couple
> > of months ago but have misplaced the Internet address. Can anyone help me
> > out with this address or does anyone have a check list that they would like
> > to share. Thanks in advance for all responses.
> >
>
> This sounds like something I'd be interested in also. We are still trying to
> develop a list for our use but those wheels grind very slowly.
>
> TIA
>
> JoAnn L. Amerson
> Design Librarian
> Red Lion Controls, Inc.
> E-mail: [log in to unmask]
> Voice: (717) 767-6961 ext 6308
>
>
We have an ISO controlled PCB Design process which contains the
following checklists covering the various phases of the process.
new_geometry.checklist: Used to check newly created PCB footprint geoms.
new_pwb_input.checklist: Used to verify R&D inputs to the PCB design
process before we start layout.
new_pwb_layout.checklist: Step by step check of the layout process
divided into nine parts:
Input Verification
Database Creation
Part Placement
Routing
Design Completion(silks,masks,planes etc)
Post Processing
Checking
Release to Vendor
PCB Documentation
artwork_package.checklist: Used to check the artwork and fabrication
drawings.
ate_package.checklist: Used to verify that all required data is being
sent to ICT for test fixture creation.
vendor_package.checklist: Used to verify that all required data is being
sent to the PCB Fab house.
These documents have some specifics which assume a Mentor toolset and
other company specific requirements. They are ascii text files which
can be easily modified to your process/tool specifics.
I would be happy to discuss/share them with you. Please contact me
direct.
Dan Ratcliff
Principal PCB Designer
Paradyne Corporation
Largo, FL
813-530-8762
[log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|