Subject: | |
From: | |
Date: | Tue, 29 Jul 1997 20:37:11 -0400 (EDT) |
Content-Type: | TEXT/PLAIN |
Parts/Attachments: |
|
|
You could mask off the finger with DF and do the electroless Ni/Au
Strip the DF and do the electroplated Ni/Au on the fingers
Afri singh
canada
On Mon, 28 Jul 1997, B.S.Krishna wrote:
>
> Hi,
>
> Cud somebody help me in deciding the process for the following :
>
> "A board needs hard gold ( electroplated) on the fingers and Electroless Ni
> gold on the rest of the features."
>
> If special materials like tape etc., are required kindly give the specs and
> the reference for source if u know.
>
> Thanx
> Regards,
>
> B.S.Krishna.
> ----------------------------o-o-o-o-o----------------------------
> B.S.Krishna Ph:(+91-8221)26375,26584,26618
> INDAL ELECTRONICS LIMITED. 26619,27221,27222
> 12/A, Industrial Area, Fax:(+91-8221)26641
> Nanjangud 571 301 Email: [log in to unmask]
> Karnataka, INDIA Website: http://www.indalpcb.com
> ----------------------------o-o-o-o-o----------------------------
>
> ***************************************************************************
> * TechNet mail list is provided as a service by IPC using SmartList v3.05 *
> ***************************************************************************
> * To subscribe/unsubscribe send a message <to: [log in to unmask]> *
> * with <subject: subscribe/unsubscribe> and no text in the body. *
> ***************************************************************************
> * If you are having a problem with the IPC TechNet forum please contact *
> * Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
> ***************************************************************************
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|