TECHNET Archives

July 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Date:
Mon, 7 Jul 1997 09:30:25 -0400 (EDT)
Content-Type:
text/plain
Parts/Attachments:
text/plain (31 lines)
The whole idea behind baking of standard FR4 or tetrafunctional laminates
after oxide is merely to dry the cores. The is no curing or functional
purpose other than just drying of the reduced oxide and laminate.

Typically, the cores are baked in the oxide racks in a drop in oven. The
temperature needs to be slightly over 100C and typical times are 15 to 20
minutes. The reduced cores are very suseptible to staining and or
reoxidization if they are not 100% dry.

Excessive bake times and or temperatures will lead to reoxidation and loss of
acid resistance. This in turn can contribute to pink ring and or micro
delamination. The standard acid resistance test will allow you to see if you
have any significant loss of acid resistance. I would suggest any thing above
0.125mg/cm2 to be not acceptable.
I hope this helps.

Regards,
Chris McGary
Dexter Electronic Materials

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************


ATOM RSS1 RSS2