TECHNET Archives

July 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: ESD ground vs Electrical ground
From:
[log in to unmask] (Stuart Chessen)
Date:
Fri, 25 Jul 1997 08:09:42 -0700
Content-Type:
text/plain
Parts/Attachments:
text/plain (45 lines) 
     You don't need ESD protection if you don't care about failed boards.
     Failure can occur in the factory due to ESD or the ESD can damage the 
     part so it will fail in the field.
     
     
     The address below is for an ESD primer.  There is a EOS/ESD symposium 
     in Santa Clara, California  Sept 21-25, 1997 call (315)339-6937
     
     http://www.esdres.com/azesd/esd001.htm


___http://www.sec.samsung.com/support/qa/download/esref95.pdf________       __ 
Reply Separator _________________________________
Subject: ESD ground vs Electrical ground
Author:  [log in to unmask] (Lim Teong Kheng) at _Internet
Date:    7/25/97 21:27


     
Hi! I am wondering if anyone could advise me whether to use ESD ground or 
Electrical ground for my production line. At this moment we do not have a 
ESD ground but we are thinking of building one. Is this advisable?
     
*************************************************************************** 
* TechNet mail list is provided as a service by IPC using SmartList v3.05 * 
*************************************************************************** 
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   * 
* with <subject: subscribe/unsubscribe> and no text in the body.          * 
*************************************************************************** 
* If you are having a problem with the IPC TechNet forum please contact   * 
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      * 
***************************************************************************
     

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2