You may contact a representative at the following company....

Basic Electronics, Inc.
11762 Western Ave,  Ste. 'O'
Stanton, CA  90680
714-530-2400
Email: [log in to unmask]
http://www.basicinc.com

Our company manufactures a variety of different types of flex 
components... Feel free to call or email us @ the above address and direct 
your comments to Dan Dove.  Please let him know where you received 
this information...

Continued Success...


Lyle Dove
Basic Electronics, Inc.
MIS Manager
[log in to unmask]
http://www.basicinc.com


In your message you wrote:

>From: guerard <[log in to unmask]>
>To: <[log in to unmask]>
>Cc: 
>Date: Tue, 22 Jul 1997 15:27:29 +0200
>Subject: polyimide flexible jumper

>We need polyimide flexible jumpers for nuclear detector feedthrough
>fabrication. The geometric specifications are as following :
>number of conductive lines : 36
>pitch : 1 mm (distance between the axis of twoo adjacent lines)
>width of a line : 0.5 mm
>length of the flexible : 300 mm
>materials : the conductive lines are inserted between 2 polyimide foils.
>contacts : lines are ended by a contact on both sides for soldering.
>
>We are interested by any similar product (but different for one or more 
of
>our parameters) that would avoid the tooling charge.
>
>Does anybody a company that might have such products.
>
>Thank you very much
>
>      _/   _/         _/                 Bruno Guerard
>     _/   _/         _/                  email:[log in to unmask]
>    _/   _/         _/                   Institut Laue-Langevin
>   _/   _/         _/                    B.P.156, 38042 Grenoble Cedex 9, France
>  _/   _/_/_/_/   _/_/_/_/       tel:(33) 76.20.72.77 fax:(33)76.20.77.00
>








Lyle Dove
Basic Electronics, Inc.
MIS Manager
[log in to unmask]
http://www.basicinc.com


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************