We need polyimide flexible jumpers for nuclear detector feedthrough
fabrication. The geometric specifications are as following :
number of conductive lines : 36
pitch : 1 mm (distance between the axis of twoo adjacent lines)
width of a line : 0.5 mm
length of the flexible : 300 mm
materials : the conductive lines are inserted between 2 polyimide foils.
contacts : lines are ended by a contact on both sides for soldering.

We are interested by any similar product (but different for one or more of
our parameters) that would avoid the tooling charge.

Does anybody a company that might have such products.

Thank you very much

      _/   _/         _/                 Bruno Guerard
     _/   _/         _/                  email:[log in to unmask]
    _/   _/         _/                   Institut Laue-Langevin
   _/   _/         _/                    B.P.156, 38042 Grenoble Cedex 9, France
  _/   _/_/_/_/   _/_/_/_/       tel:(33) 76.20.72.77 fax:(33)76.20.77.00

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************