Subject: | |
From: | |
Date: | Tue, 22 Jul 1997 15:34:10 +0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Hi,
Does anyone know how would the grain size of the matt surface of the Cu
foil (say 1/2 oz)
affect the etching performance, peel strength and any other properties of
the PCB?
The reason is we have a Cu foil supplied from Japan with very fine grain
nodules < 1um.
Then another from Korea with larger grain at the matte surface (1 - 2um)
under the SEM.
Smooth side for this Korean foil is also rougher.
I read one article from the Japan supplier that the smaller the grain the
faster the etching rate, thus easier and better etching especially for
fine-lines.
Any Comment?
Richard
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|