TECHNET Archives

July 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Standard PCB/PWB Trace Width's
From:
jon johnson <[log in to unmask]>
Date:
Mon, 21 Jul 1997 11:00:37 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (24 lines) 
Mike 

Standard for the industry is 6 and 6 for line width and space most shops
can do 5 and 5 without a problem but 6 and 6 is standard for production
houses.  Prototype vendors can do much tighter some down to 2 and 2 but
this tight has a high risk and fall out.   Your vendor choices must be made
on a cost vs reliability need choice.

Good Luck!

Jon Johnson
[log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2