TECHNET Archives

July 1997

TechNet@IPC.ORG

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
"Michael Forrester"<[log in to unmask]>
Date:
Fri, 18 Jul 1997 17:38:37 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (28 lines)




We currently design boards with 8 mil. traces.  We have recently tried to
go to 6 mil. traces and found that we had reliability problems from batch
to batch.  What is the smallest trace that is considered reliable by todays
standards?  Is it just our PCB/PWB manufacturer that may have a problem.
Typically what we saw was over etching of the traces.  Thank you.

Best Regards,

Mike Forrester
LeCroy Corp.
[log in to unmask]


***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************


ATOM RSS1 RSS2