 
| Mime-Version: |
1.0 |
| Content-Type: |
text/plain; charset="us-ascii" |
| Old-Return-Path: |
|
| Date: |
Wed, 30 Jul 1997 14:54:09 -0400 |
| Precedence: |
list |
| >From willli Wed Jul 30 14: |
15:56 1997 |
| Resent-Sender: |
|
| X-Mailing-List: |
|
| X-Sender: |
|
| TO: |
|
| Return-Path: |
<TechNet-request> |
| X-Loop: |
|
| Resent-From: |
|
| Received: |
by ipc.org (Smail3.1.28.1 #2)
id m0wteD8-000Bj9C; Wed, 30 Jul 97 14:15 CDT |
| Resent-Message-ID: |
<"Xhr6o2.0.34N.CAvtp"@ipc> |
| Subject: |
|
| From: |
|
| From [log in to unmask] Thu Jul 31 12: |
20:20 1997 |
| Cc: |
|
| X-Mailer: |
Windows Eudora Pro Version 3.0 (32) |
| Message-Id: |
|
| Parts/Attachments: |
|
|
As a process engineer in a past life my favorite solderability test of
PWB's was to simply run a bare board through the wave solder machine or to
print paste and reflow. Inspect the board for wetting, solder flow, solder
sticking to the mask, delamination, discoloration, etc. This test provides
you with more practical information on the compatibility of boards to your
process than with any other method I am aware of.
Denis Meloche
Heraeus Cermalloy
610-825-6050
At 11:47 AM 7/30/97 -0400, you wrote:
>
>Good Morning,
>
>I am in need of implementing a solderability test for PCBs received from
>bareboard suppliers. The test should be simple and quick. Does anyone
know of
>a procedure for solderability that might be used?
>
>mike
>
>
>--
> /\
> _\/_
> /_/\_\
>
>Mike Masters
>QA Materials Engineering Section
>Office: (919) 479-3771
>FAX: (919) 479-3328
>Internet: [log in to unmask]
>
>
>
>***************************************************************************
>* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
>***************************************************************************
>* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
>* with <subject: subscribe/unsubscribe> and no text in the body. *
>***************************************************************************
>* If you are having a problem with the IPC TechNet forum please contact *
>* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
>***************************************************************************
>
>
>
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|
