TECHNET Archives

July 1997

TechNet@IPC.ORG
Options: Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Received:
by ipc.org (Smail3.1.28.1 #2) id m0wl5YM-000BjYC; Sun, 6 Jul 97 23:37 CDT
Old-Return-Path:
<[log in to unmask]>
Date:
06 Jul 97 21:47:53 -0800
Precedence:
list
Resent-From:
[log in to unmask]
Resent-Sender:
TechNet-request [log in to unmask]
>From willli Sun Jul 6 23:
37:49 1997
Status:
O
X-Mailing-List:
<[log in to unmask]> archive/latest/13799
TO:
Richard_Olsen <[log in to unmask]>
X-Status:
Return-Path:
<TechNet-request>
From [log in to unmask] Mon Jul 7 08:
54:30 1997
X-Loop:
[log in to unmask]
Resent-Message-ID:
<"PSmZN3.0.jf9.DA7mp"@ipc>
Content-transfer-encoding:
7bit
Content-type:
text/plain; charset=us-ascii
Subject:
Re: Oxide Post Bake
From:
"Thomas E. Waznis" <[log in to unmask]>
Message-ID:
<[log in to unmask]>
In-Reply-To:
<[log in to unmask]>
X-Mailer:
THOR 2.5 Elysium (Amiga;TCP/IP)
MIME-Version:
1.0
Parts/Attachments:
text/plain (31 lines) 

>     Hello,
>        Does baking inner layers after oxide conversion, (prior to lay up)
>     help in any way? How does it help? How can it hurt? Are some shops
>     doing this?
>     Thank you,
>     Rich


A short bake at low temp. could help. We found water levels of over 1000 ppm
comming off our Oxide line dryer. A 215 F bake for 45 minutes (1"stack)
dropped this to below 300 consistently.
Too much bake will oxidize the copper and lessen adhesion.



Tom Waznis

Hallmark Circuits Inc.

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

ATOM RSS1 RSS2