you may try EFD or I & J Fishcher for spares on dispensers. Any body who can 
provide contact no for EFD.
The internet address for I&J Fisnar is www.IJfisnar.com
 ----------
From: Miguel Apezteguia
To: [log in to unmask]
Subject: Solder Dispensing Valve and Controller
Date: Monday, July 14, 1997 6:50PM

To Whom It May Concern:

I am a graduate student doing research into solder dispensing
systems.    I would like to design and build a system that does the
dispensing and pick and place at one station, with one robot.  I am
trying to find companies that specialize in dispensing technology in
order to buy a valve and its controller capable of dispensing a dot
10-12 mils.

I have contacted several of the larger companies, (Asymtek, Camelot),
but they will only sell the entire dispensing machine, with a minimum
price of $40,000, on the low end.  I don't need the gantry, stepper
motors and everything else that they come with, just the valve and the
controller to interface with my robot.

I was given this email address, from an individual at a solder
manufacturing facility, as a great place to begin.  If you have any
information or know of any companies that specialize in these valves I
would appreciate any information that is available.

Sincerely,


Miguel Apezteguia


ph:  801-356-3672
fax:      801-378-7575

post:     435 CTB
     Brigham Young University 
     Provo, UT 84604

email:    [log in to unmask]

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************

***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]>   *
* with <subject: subscribe/unsubscribe> and no text in the body.          *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact   *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask]      *
***************************************************************************