Subject: | |
From: | |
Date: | Mon, 14 Jul 1997 12:50:07 -0600 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
To Whom It May Concern:
I am a graduate student doing research into solder dispensing
systems. I would like to design and build a system that does the
dispensing and pick and place at one station, with one robot. I am
trying to find companies that specialize in dispensing technology in
order to buy a valve and its controller capable of dispensing a dot
10-12 mils.
I have contacted several of the larger companies, (Asymtek, Camelot),
but they will only sell the entire dispensing machine, with a minimum
price of $40,000, on the low end. I don't need the gantry, stepper
motors and everything else that they come with, just the valve and the
controller to interface with my robot.
I was given this email address, from an individual at a solder
manufacturing facility, as a great place to begin. If you have any
information or know of any companies that specialize in these valves I
would appreciate any information that is available.
Sincerely,
Miguel Apezteguia
ph: 801-356-3672
fax: 801-378-7575
post: 435 CTB
Brigham Young University
Provo, UT 84604
email: [log in to unmask]
***************************************************************************
* TechNet mail list is provided as a service by IPC using SmartList v3.05 *
***************************************************************************
* To subscribe/unsubscribe send a message <to: [log in to unmask]> *
* with <subject: subscribe/unsubscribe> and no text in the body. *
***************************************************************************
* If you are having a problem with the IPC TechNet forum please contact *
* Dmitriy Sklyar at 847-509-9700 ext. 311 or email at [log in to unmask] *
***************************************************************************
|
|
|